Starting at $11,178
Pricing valid in US only
Cut Sheet for 9971 Series Lens Coupled Gated Intensifier for CCD Cameras
Product No: NV-4
.JPG)
For more information contact:
Mike Thorsted 540-374-1000 x114mthorsted@syntronics.net
9971 Series Lens Coupled Gated Intensifier for CCD Cameras
The NVS 9971 series is a lens coupled, gated image intensifier accessory for use with any C-Mount video camera. It consists of an image intensifier wired for gating and external gain control, a gate drive amplifier that switches the photocathode on and off, and a relay lens assembly. The gate drive amplifier converts TTL level signals into the levels required to switch the photocathode. The Model 9971 is available with a Gen II, Gen III, or UV intensifier. Although the video relay lens is designed for use with a 2/3" format camera, it may also be used with a 1/2" format with a slightly reduced field of view. Video relay lenses for other formats are also available.
Specifications
| Features | Performance |
|---|---|
| Model 9971X (Gen II) | |
| Type: | DEP XX2050 (XD-4), P-43 phosphor |
| Spectral Sensitivity: | 350nm to 920nm |
| Luminous Gain (2850ºK): | 30,000 typ. to 50,000 max |
| Gate Mode: | External |
| Gate Width: | 20ns to 34ms (up to 300kHz rep. rate) |
| Gain: | Zero to max gain (0-10V input) |
| Sensitivity: | 5 x 10-5 lux full video |
| 1 x 10-6 lux useable video | |
| Model 9971/III (Gen III) | |
| Type: | ITT FS9911C, P-43 phosphor |
| Spectral Sensitivity: | 400nm to 940nm |
| Luminous Gain (2850ºK): | 50,000 typ. to 80,000 max |
| Gate Mode: | External |
| Gate Width: | 50ns to 34ms (up to 20kHz rep. rate) |
| Gain: | Zero to max gain (0-10V input) |
| Sensitivity: | 1 x 10-5 lux full video |
| 5 x 10-7 lux useable video | |
| CCD Camera (not included): | |
| Type: | Sony XC-ST70 interline transfer |
| Sensor: | Sony ICX-082 (2/3" format) |
| CCD Pixels: | 768(H) x 494(V) |
| Noise Figure: | >60dB |
| Output Signal: | RS-170 (NTSC) |
| Sync: | Genlock or crystal controlled |
| VD and HD: | TTL level |
| Miscellaneous | |
| Input Power: | 12VDC, nominal 150mA |
| Size/Weight: | 127mm x 56mm x 71mm, 0.67 kg |
| Lens Mount: | 1" format, C-Mount with back focus adjustment |
| Options: | S-20 photocathode for UV (180-830nm response) Control box: Modes-auto, internal, external gating Control size-135mm x 64mm x 79mm |
| Also available: | |
| Model 9971UV | S20 Gen II |
| Model 9971 | Gen II, no gating, no gain control |